Finval 685 FishPro
Overview
Finval 685 FishPro is a multi-purpose boat that can be used for both family vacations and fishing tourism. The consoles have an anodized aluminium fitting and reliable wind protection of tempered glass. An autonomous heater and heated seats will help warm up in cold weather. A special compartment with a removable recycle bin helps keep the boat clean. A locker for 10 spinning rods, a 130 l livewell with oxygenator, an organizer for large baits, and side shelves create comfort while fishing. Finval 685 FishPro is capable of reaching the speed of 100 km/h, has a strong hull, and is ready for operation under any weather conditions.
Standard Features
- All-welded hull made of marine-grade aluminium almg4,5mn (5083) 3-4 mm thickness
- Raptor® wear-resistant coating on consoles, transom, and gunwale
- Two consoles with a Taylor Made walk-through tempered safety glass windshield and a wicket door in the middle
- Outer sides are covered with a hydrophobic wrap (color to choose)
- Inner boards in the cockpit, on the bow and the aft decks covered with marine grade cut-loop carpet
- Cockpit deck covered with marine-grade vinyl
- Transom platforms covered with soft anti-skid SeaDek surface
- Fuel system with a 225-liter aluminium tank
- Two lockers in the bow deck with a gas spring device of the covers
- Rod locker in bow deck for 10 rods up to 2.8 m long with a gas spring device of the cover
- Compartment for storage of the full canvas enclosure
- 130-liter livewell with an oxygenator and led light
- Two Bass Boat seats with back/forth adjustment
- A set of two marine suspension systems
Shockwave S5
- Pedestal base for a fishing seat on the bow deck
- Pocket for keeping a landing net
- Locker for traction batteries in the cockpit
- Double USB 5V 2A power socket in a captain console
- Double USB 5V 2A power socket in a passenger console
- 12v power outlet on a captain console
- LED-lighting of cockpit, aft, and bow decks, lockers, the passage between consoles, boards’ niches, and shelves, aft organizer
- Dry lockers with forced ventilation and drainage system
- Six SS push-up mooring cleats
- SS compression latches
(3 with a lock/ 1 without a lock) - Preparation for installation of audio system, chart plotters, trolling motor, high-pressure washer, heated seats, autonomous heater
- LUX snap-in travel/mooring cover
- Steering wheel
- Automatic bilge pump
Optional Features
EXTRA
- Covering cockpit sides, bow, and aft decks with marine-grade leather
- Engine trim adjustment system on the bow deck
- Ultraflex hydraulic steering system, up to 300 hp (substitution)
- Organizer for large baits with cup holders, safety handles and LED-light
- Stainless steel rod holder for two rods
- Stainless steel rod holder for three rods
- Oval table with support and dismountable stand
- Stainless steel folding cup holder
- Diesel Air heater Eberspächer Airtronic D4
- Spraying of the Line-X protective coating
on the gunwale, recess and transom - Spraying of the Line-X protective coating
on the consoles, gunwale, recess and transom - Fuel filter
ELECTRIC EQUIPMENT
- Built-in horn
- Additional stainless steel 12V power outlet
- Additional plastic 12V power outlet
- Additional double USB 5V2A power socket
- Windshield wiper
- LED-lighting of bow deck
- LED-lighting of rod locker
- LED-lighting of aft deck
- LED-lighting of cockpit
- LED-lighting of the passage between the consoles
- LED underwater light, mounting on transom
- High pressure washer
Specification
| Hull length | 6.83 m |
| Beam | 2.32 m |
| Deadrise at transom | 18° |
| Draft | 400 mm |
| Transform height | 635 mm (XL) |
| Hull material | AlMg 4,5 Mn (5083) |
| Hull thickness | 3-4 mm |
| Boat weight | 1050 kg |
| Max weight capacity | 1220 kg |
| Engine | 250-350 |
| Fuel tanks | 225 l |
| Livewell | 135 l |
| Persons | 6 |
| Road storage | 6 / 2.8 m; 4 / 2.7 m |
You May Also Be Interested In
