OVERVIEW
Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive environmental protection available — delivering a Signature performance out on the water.
- CLASS-D AMPLIFIER DESIGN DELIVERS HIGHER EFFICIENCY AND GREATER OUTPUT.
- CONNECT UP TO TWO SPEAKERS PER CHANNEL AT 2 OHMS, OR BRIDGE TWO CHANNELS AT 4 OHMS FOR INCREASED POWER.
- CONFORMAL COATED PCBS PROVIDE EXTRA PROTECTION FROM THE MARINE ELEMENTS.
- RIGID ALUMINIUM ALLOY HEAT SINK IS MOULDED FOR GREATER DISSIPATION OF HEAT.
- THE AMPLIFIERS ARE AVAILABLE IN MONOBLOCK, 4-CHANNEL, 5-CHANNEL, 6-CHANNEL AND 8-CHANNEL CONFIGURATIONS.
- ENGINEERED TO LAST SEASON AFTER SEASON, THE AMPLIFIERS INCLUDE A SUPPORTED 3-YEAR WARRANTY.
IN THE BOX
- Four 8-gauge, self-tapping screws
- 3 mm hex key (for the top cover and power terminals)
- 2.5 mm hex key (for the speaker terminals)
- Polishing cloth
- Spare J1171 compliant 40 A blade-type fuses
SPETIFICATIONS
General |
|
| WARRANTY | 3 years |
|---|---|
| CHANNELS | Monoblock/4/5/6/8 |
| PHYSICAL DIMENSIONS (HEIGHT) | 210 mm (8.27″) |
| PHYSICAL DIMENSIONS (WIDTH) | Monoblock/4/5-Channel: 300 mm (11.81″) 6/8-Channel: 420 mm (16.54″) |
| PHYSICAL DIMENSIONS (DEPTH) | Monoblock/4/5-Channel: 50 mm (1.97″) 6/8-Channel: 57 mm (2.24″) |
| WEIGHT | Monoblock: 3.8 kg (8.38 lbs) 4-Channel: 3.53 kg (7.77 lbs) 5-Channel: 3.6 kg (7.94 lbs) 6-Channel/6-Channel (24 V): 5.3 kg (11.68 lbs) 8-Channel: 5.6 kg (12.35 lbs) |
| OPERATING VOLTAGE | Monoblock/4/5/6/8-Channel: 10.8-16 VDC 6-Channel (24 V): 21.6-32 VDC |
| OPERATING TEMPERATURE RANGE | 0° to 50° C (32° to 122° F) |
Audio |
|
| AMPLIFIER CLASS | Class D |
|---|---|
| RATED CONTINUOUS (RMS) POWER (14.4 V INPUT @ 4 OHM < 1% THD) | Monoblock: 500 W x 1 4-Channel: 150 W x 4 5-Channel: Main: 80 W x 4/Sub: 250 W x 1 6-Channel: 100 W x 6 8-Channel: 100 W x 8 |
| RATED CONTINUOUS (RMS) POWER (14.4 V INPUT @ 2 OHM < 1% THD) | Monoblock: 850 W x 1 4-Channel: 220 W x 4 5-Channel: Main: 130 W x 4/Sub: 330 W x 1 6-Channel: 140 W x 6 8-Channel: 140 W x 8 |
| RATED CONTINUOUS (RMS) POWER (28.8 V INPUT @ 4 OHM < 1% THD) | 6-Channel (24 V): 100 W x 6 |
| RATED CONTINUOUS (RMS) POWER (28.8 V INPUT @ 2 OHM < 1% THD) | 6-Channel (24 V): 140 W x 6 |
| FREQUENCY RESPONSE (+0, -1DB) | Monoblock: 10 Hz-320 Hz (-3 dB, dB @ 4 Ohm rated power) – subwoofer only 4/5-Channel: 10 Hz-50 kHz (-3 dB, dB @ 4 Ohm rated power) 6/8-Channel and 24-Volt 6-Channel: 10 Hz-40 kHz (-3 dB, dB @ 4 Ohm rated power) |
| INPUT SENSITIVITY @ RCA INPUTS | 0.3 V-8 V RMS (user adjustable) |
| INPUT VOLTAGE RANGE @ RCA INPUTS | 0.3 V-8 V RMS (user adjustable) |
| INPUT IMPEDANCE | Monoblock/5-Channel: 4 kΩ nominal 4/6/8-Channel and 24-Volt 6-Channel: 7 kΩ nominal |
| CURRENT CONSUMPTION (STANDBY) | Monoblock/4/5/6/8-Channel: < 1 mA @ 14.4 V input 6-Channel (24 V): < 1 mA @ 28.8 V input |
| CURRENT CONSUMPTION (IDLE) | Monoblock/4/5/6/8-Channel: < 2.5 A @ 14.4 V input 6-Channel (24 V): < 1.25 A @ 28.8 V input |
| CURRENT CONSUMPTION (MAX) | Monoblock: 120 A 4/5-Channel: 80 A 6-Channel: 75 A 8-Channel: 100 A 6-Channel (24 V): 35 A |
| FUSE RATING | Monoblock/6-Channel: 3 x 40 A ATC blade-type (SAE J1171 compliant) 4/5-Channel: 2 x 40 A ATC blade-type (SAE J1171 compliant) 8-Channel: 4 x 40 A ATC blade-type (SAE J1171 compliant) 6-Channel (24 V): 3 x 20 A ATC blade-type (SAE J1171 compliant) |
| MIN. COPPER POWER/GROUND WIRE GAUGE | 1 |
Signal Processing |
|
| HIGH-PASS/LOW-PASS FULL RANGE FILTER | Yes (user selectable) |
|---|---|
| HP VARIABLE CROSSOVER FREQUENCY RANGE | Monoblock: 10 Hz-80 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| LP VARIABLE CROSSOVER FREQUENCY RANGE | Monoblock: 32 Hz-320 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| BASS BOOST | 0 dB-9 dB, user adjustable (zone 3 only) |
Security Information |
|
| SECURITY UPDATES UNTIL AT LEAST (YYYY-MM-DD) | 2021-03-08 |
|---|---|
Reviews
There are no reviews yet.